Bandini, the warmth of home

The electric water heater is the simplest and cheapest way to get hot water always available at home, in the bathroom, in the kitchen. The electric water heater that we make means simplicity of installation, flexibility, efficiency, the right quality-cost ratio.

PM-TB

Braün PM-TB design and parameters were developed from the Braün PM-B model
series.
Thanks to a reinforced joint and electronic control unit, the heater can also be installed
in a water supply system to your custom faucet by the use of plumbing couplings (fi
ttings). With its design and dimensions, it is intended to be installed only to a single
location.
Simple installation of the heater under the sink or basin can be done by screwing the
bracket to a wall, which is by default fi tted on the rear cover of the product. Protection
unit using a thermal fuse significantly extends the life of the heating coil.
! Other specifi cations are the same as for the Braün PM-B model series.

  • Installed to pressure-free and commonly available water faucets
  • 6 bar pressure mode with switching from 0.1 MPa
  • Hydraulic switching of microswitch
  • Wiring of 230V at 3.5 kW directly to the socket
  • Immediate and continuous water heating up to 43 °C
  • One performance level of the heating coil
  • Electrical protection against overheating of the coil

Electric flow water heater, electronically operated with pressure mode

Technical data sheet and dimensions

DATA SHEET & MEASURES

Prova
Chimney
Prova

External temperature regulation

Prova

Installation kit

Prova

CFC free polyurethane insulation

Prova 2

Recyclable goods

Prova 2

Erp 2017

Prova 2

Signal lamp

Prova 2

Safety thermostat

Prove

Smoke control

Prove

Armored resistance in Copper

Prove

Components compliant with ROHS standards

Prove

Magnesium anode

Prove

Respect for the environment

Prove

Low noise

Prove

Inspection flange

Technical data

Power Input

3,5 kw

Current

16 A

Voltage Phase

230 V

Water press min.

0,09 MPa

Water press max.

0,6 MPa

Protection

IP 24

Power Input

4,5 kw

Current

20 A

Voltage Phase

230 V

Water press min.

0,12 MPa

Water press max.

0,6 MPa

Protection

IP 24

Power Input

5,5 kw

Current

25 A

Voltage Phase

230 V

Water press min.

0,15 MPa

Water press max.

0,6 MPa

Protection

IP 24

Power Input

Current

Voltage Phase

Water press min.

Water press max.

Protection

Power Input

Current

Voltage Phase

Water press min.

Water press max.

Protection

Power Input

Current

Voltage Phase

Water press min.

Water press max.

Protection